To perform upgrade, you must have a functioning ScanBas/SRU, PC and software.

  • SRU must be upgraded to the latest Software (V.8.x.x) using standard upgrading procedures.
  • The network settings in the SRU, accessed clicking the wrench icon, must be set to ”Master” and set with an IP of 10.1.3.100. FTP box can remain empty, or insert ip 10.1.3.150.
  • Connect SRU to the PC with a regular Network Cable.
  • Make sure the USB dongle is connected to the PC, and start CCWIN.

Note: Any ScanScreen slave boxes must be disconnected from the network.